Chop Saw in Prep

Chop Saw in Prep
Process:
The process of operating the chop saw in prep.
Definitions:
Any needed definitions
Procedure:

1. Only trained and safety signed off operators are allowed to operate saws.
2. Safety Sign off steps need to be followed daily.
   1. Inspect the blade, inspect the cables, ensure the miter lock is operating correctly, complete pre-inspection safety sheet for saw.
   2. If any issues are discovered, lock the saw out.
3. Make sure proper PPE is worn when using the saw.
   1. Ear protection and safety glasses.
4. Make sure the area around the saw is clear and there is enough space to operate.
5. Measure out the length of wood needed.
6. Make sure the wood is pressed up to the saw’s fence.
   1. Do not cut more than twelve 1X2” pieces of wood at a time.
7. Make sure hands, loose clothing, hair, or any other object is not in the path of the saw.
   1.  Never pass hands under the saw guard.
8. Activate the saw and commence its downward cut trajectory.  
9. Once the wood is cut, discard any small piece of wood into the wood dumpster.
   1. Only discard pieces 5” and smaller.
10. When you are done cutting for the day, or at the end of shift, clean the saw off.