Putting Away Racks in Delivery

Putting Away Racks in Delivery
Process:
The process for scanning windows into rack locations in delivery.
Definitions:
Procedure:

1. Before putting racks away, make sure windows on the rack are going to the same destination.
   1. Example: DEN, NEV, SAC, LA, IF, ETC.
   2. If you find a rack that has windows with different destinations, please inform your team lead or supervisor.
2. Find an empty bin to put the rack away.
3. Scan the location of the empty bin and then scan the windows.
4. Once finished scanning the rack, go back and scan all the windows again.
   1. Don’t scan the windows twice at the same time.
   2. Check the scanner’s screen every other scan to make sure it’s not disconnected, and the windows are being binned correctly.
5. After scanning the second time, write down the location of where the windows were put away on the frame.
   1. Write the location right below the barcode.
   2. Use only dry erase markers.
6. While you are putting windows away, scan any windows you see with no location, or the wrong location, written on them.
7. Racks that are condensed by loaders will need to be rescanned and put away again.
8. Windows that are over 74” tall and / or over 72” long will need to be pulled off the rack and scanned on a bin that is assigned for big windows.