Finalizing Sound Windows

Finalizing Sound Windows
Process:
The process for finalizing sound windows.
Definitions:
Any needed definitions
Procedure:
SV or SH Frames

1. Pull VT harp to the VT side of the line.
2. Pull DL harp to the DL side of the line.
3. On the VT side, set the primary VT and then the secondary VT.
   1. On the secondary VT, place the NFRC and sound window water warning sticker.
4. On the DL side, set the primary DL and then the secondary DL.
5. On each side of the line, finalize the VTs and DLs in the same order.
   1. Primary and then secondary.
6. When catching, insert the primary VT, secondary DL, and then the secondary VT.
7. To prevent any of the sash from falling out, tie the window together with twine.

DV Frames

1. Pull VT harp to the VT side of the line.
2. Pull DL harp to the DL side of the line.
3. On the VT side, set the two primary VTs and then the two secondary VTs.
   1. On one of the secondary VTs, place the NFRC and sound window water warning sticker.
4. On the DL side, set the primary DL and then the secondary DL.
5. On each side of the line, finalize the VTs and DLs in the same order.
   1. Primaries and then secondaries.
6. When catching, insert the two primary VTs, secondary DL, and then the two secondary VTs.
7. To prevent any of the sash from falling out, tie the window together with twine.

PW Frames

1. Pull DL harp to the DL side of the line.
2. Set the primary DL and then the secondary DL.
   1. Place the NFRC onto the secondary DL.
3. Finalize the primary DL and secondary DL in the same order.
4. Clean the inside of the sound window thoroughly.
5. Block the sill of the frame with 7/8” white setting blocks.
6. Set and bead the secondary DL into the primary DL.