Paint Mixing Process

Paint Mixing Process
Process:
Overview of process
Definitions:
Any needed definitions
Procedure:

1. Ensure proper PPE is worn.
   1. Blue/black paint gloves
   2. Respirator
   3. Safety glasses
2. Gather all needed products/equipment
   1. PPS cups/lids/toppers, paint, solvent, catalyst, stir stick, PPS measuring cups
3. Place a PPS cup liner in the PPS measuring cup.
4. Paint is mixed at a 4:1:1 ratio (on side of measuring cup)
5. Start by pouring paint into cups at the proper amount. (example used, 8)(see picture attached)
6. Add in the catalyst to the next dash of the same number you poured the paint to.
7. Add in the solution to the next dash of the same number you poured the paint to.
8. Mix paint, catalyst, and solution together with a stir stick.
   1. Making sure to not only stir but to lift and stir to ensure all elements are combined.
9. Dispose of stir stick into the necessary trash receptacle.
10. Place PPS lid onto measuring cup/liner screwing it into place.
11. Place the topper onto the lid to ensure the paint does not dry out.

Paint is good for up to 8 hours after mixing in the chemicals

• Paint Line
• Catalyst Line
• Solution Line