SDL Tape Application

SDL Tape Application
Process:
The process of applying tape to SDL strips.
Definitions:
SDL: Simulated divided light
Procedure:

1. With ¼ of an alcohol pre-saturated wipe, wipe down the back side of an entire SDL linear.
   1. Do not scrub the SDL; pass it over once with the wipe.
   2. Do not reuse wipes; once used, dispose of them.
2. Allow the SDL strip to air dry.
3. Run the SDL strip through the tape applicator.
   1. Make sure the tape is being applied straight.
   
4. With a utility knife, cut the tape at the end of the SDL strip.